high performance Waterproofing system

 

z

is a high performance Waterproofing system that prevents water penetration, thermal transmittance, heat loss and noise reduction. SAB® Tron combines the thermal insulation properties of polyurethane spray foam with the stability and mechanical characteristics of polystyrene resins in one composite product. This allows for easy installation on all types of roofs.

 Optimisation Method of Statement Thermal & Moisture Insulation

The Contractor is referred to the Specifications and Drawings for all details that is related to this Section of the Works, in order to insure full commitment with all the requirements contained therein, thus the thermal & moisture insulation will reach to the required professionalism and effectiveness.

  • Insulation works should be implemented by specialized company and should be approved from the consultant; as well it should have minimum 5 years experience.
  • Electrical conductors and water pipes should be sealed properly, to avoid any water leakage.
  • Water rain pipes should be in place at specific height (approximately 3 cm), according to roof slope.
  • Parapet should be plastered to the required height, (after 25 cm Vertical from the roof slab).
  • The threshold either for door or staircase, as well as dome holes should be in place and at specific height approximately 25 cm, (in case of existing).
  • All electrical conductors or other pipes might be existing in the middle of roof slab, should be passing through sleeves and on 35 cm minimally height. , these sleeves    will support replacement procedures in case of further maintenance for these conductors are required.

Our Top keywords 

Waterproofing Materials UAE

Shams Al bawadi Insulation Systems

Combo Roof Waterproofing Saudi Arabia

Bathroom Waterproofing in UAE

Comments

Popular posts from this blog

SAB Substructure One Layer

Shams Al bawadi Insulation Systems | Sab-us.com